Installation manual

Feature 56 new Area 8 – Account Code

Segments 1-6 10 10 10 10 Reserved new Reserved new

Feature 56 contains the account code sent when area 8 is reported. If Feature 56 is left as default (all ‘10’s), then the

account code corresponding to the phone number dialled will be used.

Feature 57 Area 8 – Option and Report Selections

Feature 57 is used to enable certain options that can be accessed or are visible to the user from the code pad of the

system. In addition, certain communicator reports are enabled. Each of these options can be enabled by area 8.

If the option selection feature for any area is left blank, that area will use Feature 16 for the option selection. Refer

to Feature 39 in this section for options table.

Feature 58 new Area 8 – Entry / Exit Timers

Entry Time 1 Exit Time 1 Entry Time 2 Exit Time 2

Segments 1-6 30 60 30 60

Reserved new Reserved new

Feature 58 sets the primary and secondary entry / exit times for area 8. If all segments in this Feature are set to ‘0’, the

entry / exit time for this area will follow area 1 (Feature 17). Valid entries are 10-255 seconds.

Zones 17 – 48 Configuration

Feature 59 Zones 17-24 Configuration Group

Segments 1-8 16 16 16 16 16 16 16 16

Feature 59 contains the Configuration Group (zone type) for zones 17-24. Segment 1 is for zone 17, and Segment 8 is for

zone 24.

Feature 60 Zone Area Select - Zones 17-24

Feature 60 is used to select the area(s) that zones 17-24 reside in. A zone may reside in any combination of the eight

areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides

in more than one area will be reported to its lowest area. Feature 60 has 8 segments. Segment 1 corresponds to zone 17

and Segment 8 corresponds to zone 24.

Area 1 Area 2 Area 3 Area 4 Area 5 Area 6 Area 7 Area 8

Segment 1 – Zone 17 (1) 2 3 4 5 6 7 8

Segment 2 – Zone 18 (1) 2 3 4 5 6 7 8

Segment 3 – Zone 19 (1) 2 3 4 5 6 7 8

Segment 4 – Zone 20 (1) 2 3 4 5 6 7 8

Segment 5 – Zone 21 (1) 2 3 4 5 6 7 8

Segment 6 – Zone 22 (1) 2 3 4 5 6 7 8

Segment 7 – Zone 23 (1) 2 3 4 5 6 7 8

Segment 8 – Zone 24 (1) 2 3 4 5 6 7 8

Feature 61 Zones 25-32 Configuration Group

Segments 1-8 16 16 16 16 16 16 16 16

Feature 61 contains the Configuration Group (zone type) for zones 25-32. Segment 1 is for zone 25, and Segment 8 is for

zone 32.