Installation manual

© Hills Industries 2009 Page 49
Feature 87 Configuration Group 11 Alarm Event Code
Segment 1 3
Feature 87 contains the Contact I.D. event code sent for zone configuration group 11 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 88 new Configuration Group 11 Characteristic Select
Seg 1 4 Seg 2 2578 Seg 3 245678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 89 Configuration Group 12 Alarm Event Code
Segment 1 3
Feature 89 contains the Contact I.D. event code sent for zone configuration group 12 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 90 new
Configuration Group 12 Characteristic Select
Seg 1 4 Seg 2 25678 Seg 3 25678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 91 Configuration Group 13 Alarm Event Code
Segment 1 3
Feature 91 contains the Contact I.D. event code sent for zone configuration group 13 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 92 new
Configuration Group 13 Characteristic Select
Seg 1 4 Seg 2 2567 Seg 3 245678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 93 Configuration Group 14 Alarm Event Code
Segment 1 3
Feature 93 contains the Contact I.D. event code sent for zone configuration group 14 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 94 new Configuration Group 14 Characteristic Select
Seg 1 4 Seg 2 25678 Seg 3 245678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Feature 95 Configuration Group 15 Alarm Event Code
Segment 1 3
Feature 95 contains the Contact I.D. event code sent for zone configuration group 15 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.