Installation manual

© Hills Industries 2009 Page 51
Feature 105 Configuration Group 20 Alarm Event Code
Segment 1 3
Feature 105 contains the Contact I.D. event code sent for zone configuration group 20 alarm reports. The desired event
code should be chosen from the Contact I.D. Configuration Group Event Table in the Appendix section.
Feature 106 new Configuration Group 20 Characteristic Select
Seg 1 Seg 2 2458 Seg 3 25678 Seg 4 new Seg 5 new
Use ‘Configuration Group Characteristic table’ described in Feature 68, of this section.
Zones 49 – 128 Configuration
new
Feature 119 new Zones 49-56 Configuration Group
Segments 1-8 16 16 16 16 16 16 16 16
Feature 119 contains the Configuration Group (zone type) for zones 49-56. Segment 1 is for zone 49, and Segment 8 is for
zone 56.
Feature 120 new Zone Area Select - Zones 49-56
Feature 120 is used to select the area(s) that zones 49-56 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area. Feature 120 has 8 segments. Segment 1 corresponds to zone 49
and Segment 8 corresponds to zone 56.
Refer to Feature 60 for the zone area select table.
Feature 121 new Zones 57-64 Configuration Group
Segments 1-8 16 16 16 16 16 16 16 16
Feature 121 contains the Configuration Group (zone type) for zones 57-64. Segment 1 is for zone 57, and Segment 8 is for
zone 64.
Feature 122 new Zone Area Select - Zones 57-64
Feature 122 is used to select the area(s) that zones 57-64 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area. Feature 122 has 8 segments. Segment 1 corresponds to zone 57
and Segment 8 corresponds to zone 64.
Refer to Feature 60 for the zone area select table.
Feature 123 new Zones 65-72 Configuration Group
Segments 1-8 16 16 16 16 16 16 16 16
Feature 123 contains the Configuration Group (zone type) for zones 65-72. Segment 1 is for zone 65, and Segment 8 is for
zone 72.
Feature 124 new Zone Area Select - Zones 65-72
Feature 124 is used to select the area(s) that zones 65-72 reside in. A zone may reside in any combination of the eight
areas. If a burglary zone resides in more than one area, it will only be active when all areas are armed. A zone that resides
in more than one area will be reported to its lowest area.
Refer to Feature 60 for the zone area select table.