Installation manual

Reliance 128 Installation Manual v1-1.doc
Quick Start Guide
Short form programming sheet for a monitored system
This is not a substitute for reading the manual
1. Hard Default Panel Unplug battery & remove power, turn on power,
Enter 971300 within 10 seconds,
Wait 12 seconds
Repeat
2. Go To Program Mode *8 9713 0#
3. Soft Default Panel 910#, Exit, Exit, [Chime], wait 12 seconds
4. Go To Program Mode *8 9713 0#
5. Change Program Code 1# n*n*n*n* #
6. Duress Code 3# n*n*n*n* #
7. Receiver Phone #1 4# n*n*n*n*n*n*n*n* #
8. System Account Code 5# n*n*n*n* #
9. Communication Format 6# 1* (1 for CID, or 3 for Domestic Dial)
10. Receiver Phone #2 7# n*n*n*n*n*n*n*n* #
11. Report Event Summary 9# 3 7 *# (for open/close, tamper/restore)
12. Phone Cut Delay 11# n*
13. Download Access Code 12# n*n*n*n*n*n*n*n*
14. Download Control (Remote Access) 14# 1* (to enable two call AMD)
15. Force Arm Globally 16# 3*#
16. Entry/Exit Time #1 & #2 17# nn*nn*nn*nn* #
17. Configuration Groups (Zone Types) 18# (zones 1-8), 20# (zones 9-16),
59# (zones 17-24), 61# (zones 25-32),
63# (zones 33-40), 65# (zones 41-48),
119# (zones 49-56), 121# (zones 57-64)
18. System Options 22# 7*7* # (for siren on tamper and
[*][44] manual communicator test enable)
19. Medical Alarm Sounder “ON” 24# 7* (enable code pad beeping)
20. Auto Test Control 32# (see Feature 32 for details)
21. Exit Program Mode Press Exit, Exit, [Chime] wait 12 seconds
22. Change Master Code (default 1234) [*5] [Master Code] [01] [New Code] #
23. Program User Codes [*5] [Master Code] [User] [User Code] #
24. Set Date & Time (at User Level)
Set System Calendar [*][9][6] [Master Code] [Day of Week]
[Month] [Day of Month] [Year]
Set System Clock [*][9][7] [Master Code] [Hour] [Minutes]
25. Walk Test * [Chime] [Master Code]
End Walk Test [Master Code]
26. Train Client/End User
Note if testing reporting, master code does not send open/closing reports by default (see Feature 2)