User's Manual

ManualsBrandsDASAN ELECTRON ManualsAudio EquipmentWireless Headset (Portable Part)

CONTENTS

1 Introduction

2 Features – headset and base unit

3 Features – base unit back and bottom

4 Setting up the unit

5 Battery Charging

6 Operation

- Pairing your Headset and Base Unit

- Checking for compatibility

- Making and ending a call using a telephone with Lifter attached

- Answering a call using a telephone with Lifter attached

- Adjusting the TX(transmit) volume

- Adjusting the RX(receive) volume

- Muting the microphone on the headset

- VoIP with PC

- De-register all headsets

- Electronic Hook Switch

7 Replacing the battery pack

8 Technical features

9 Optional accessories

Summary of content (11 pages)

PAGE 1
CONTENTS 1 Introduction 2 Features – headset and base unit 3 Features – base unit back and bottom 4 Setting up the unit 5 Battery Charging 6 Operation - Pairing your Headset and Base Unit - Checking for compatibility - Making and ending a call using a telephone with Lifter attached - Answering a call using a telephone with Lifter attached - Adjusting the TX(transmit) volume - Adjusting the RX(receive) volume - Muting the microphone on the headset - VoIP with PC - De-register all
PAGE 2
1.INTRODUCTION INTRODUCTION Do not continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way. Thank you for purchasing this product The unit has been developed using the latest wireless technology.  Switch off, withdraw the mains plug and consult your dealer. Do not allow electrical equipment to be exposed to rain or moisture.
PAGE 3
. Feature – Base Unit Back and Bottom 2.
PAGE 4
. Setting up the Unit 4 Connect the POWER SUPPLY UNIT Plug the Power Supply Unit to the DC Input Jack on the back of the unit. Then Despite the sophistication behind the unit, the set-up and operation of the unit is connect the Power Supply Unit to your wall supply. remarkably simple. Please follow these steps in the following pages and refer to the drawings on the previous pages and you will be up and running with your new wireless headset in a very short time.
PAGE 5
When charging the LEDs on the front of the base unit will illuminate in RED. The following 2 are the status and colors expected during the charging process. Checking for compatibility As telephone manufactures can vary their configuration, it is necessary to have Charging Status LED Colour Fully charged GREEN Charging RED compatibility selections on the base unit to ensure that the unit is compatible with virtually any telephone.
PAGE 6
4 Answering a call using a telephone with Lifter attached 6 Adjusting the RX (receive) volume To adjust follow these steps:  The telephone rings  Make a telephone call and ask the person you are calling for their assistance.
PAGE 7
. Replacing the Battery Pack 1 2 Removing the battery from the headset 8. Technical Features Compatibility Compatible with most standard corded desk phone Radio Frequency Range Europe: 1.8GHz (DECT)  Ensure the headset is turned off  Push the button on the inside face of the headset Radio Frequency Modulation 0.5 GFSK (Gaussian Frequency Shift Keying)  Slide battery off the headset Operating range Up to 90 meter (Approx. 300 feet) US: 1.
PAGE 8
9. Optional Accessories 1 2 Extra Battery Pack DL-570L Handset Lifter This handset lifter has been exclusively designed for use with the unit, allowing A second battery pack is available which can be charged on its own charging you to answer and end calls with the touch of a button when away from your desk. points on the unit. Adding a second battery pack will increase your talk-time to 14 Features: to 16 hours.
PAGE 9
Warranty and service We will repair or replace, at our opinion, this product if found defective due to materials or Declaration of Conformity for CE marking workmanship within the warranty period beginning from the original date of purchase. This product is warranted by authorized representative for the period specified.
PAGE 10
FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B RF Exposure Statement: digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to This equipment complies with FCC RF radiation exposure limits set forth for an provide reasonable protection against harmful interference in a residential uncontrolled environment. Use of other accessories may not ensure compliance installation.
PAGE 11