User's Manual

ManualsBrandsDASAN ELECTRON ManualsAudio EquipmentPART15 DIGITAL TRANSMISSION SYSTEM (WIRELESS HEADSET)

DW-773 Wireless Headset

User’s Manual

(DW-773H, DW-773B)

Hereby, Dasan Electronic Co.,Ltd.,

Declares that this Wireless Headset and Base is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC

CONTENTS

1 Introduction

2 Features – headset and base unit

3 Features – base unit back and bottom

4 Setting up the unit

5 Battery Charging

6 Operation

- pairing your Headset and Base Unit

- Checking for compatibility

- Making and ending a call using a telephone with Lifter attached

- Receiving a call using a telephone with Lifter attached

- Ending a call

- Adjusting the TX(transmit) volume

- Adjusting the RX(receive) volume

- Muting the microphone on the headset

- VoIP with PC

7 Technical features

8 Optional accessories

9 Label Sample & Location

Dasan Electron Co.,Ltd.

Product: Wireless Headset

Model No : DW-773H

FCC ID : WF2DW-773H

증번호:XXX-XXXX

This device is a 2.4 GHz wireless digital transceiver, intended for indoor home and

office use in all EU member states,

Summary of content (9 pages)

PAGE 1
CONTENTS DW-773 Wireless Headset User’s Manual (DW-773H, DW-773B) 1 Introduction 2 Features – headset and base unit 3 Features – base unit back and bottom 4 Setting up the unit 5 Battery Charging 6 Operation - pairing your Headset and Base Unit - Checking for compatibility - Making and ending a call using a telephone with Lifter attached - Receiving a call using a telephone with Lifter attached - Ending a call - Adjusting the TX(transmit) volume - Adjusting the RX(receive) volume
PAGE 2
1. INTRODUCTION Do not continue to operate the equipment if you are in any doubt about it working normally, Thank you for purchasing this product or if it is damaged in any way. z Switch off, withdraw the main plug and consult your dealer. The unit has been developed using the latest wireless technology. Do not allow electrical equipment to be exposed to rain or moisture.
PAGE 3
2. Feature – Headset and Base Unit 3.
PAGE 4
. Setting Up the Headset Despite the sophistication behind the unit, the set-up and operation of the unit is remarkably simple. Please follow these steps in the following pages and refer to the 4 Connect the POWER SUPPLY UNIT drawings on the previous pages and you will be up and running with your new wireless Plug the Power Supply Unit to the DC Input Jack on the back of the base unit. headset in a very short time. Then connect the Power Supply Unit to your wall supply.
PAGE 5
When charging, the LED on the front of the base unit will illuminate. The following 2 are the status and colors expected during the charging process. Checking for compatibility As telephone manufactures can vary their configuration, it is necessary to have compatibility selections on the base unit to ensure that the unit is compatible with Fully Charged Charging GREEN LEDs virtually any telephone. RED LEDs To check and adjust for compatibility between the base unit and the telephone 6.
PAGE 6
4 Receiving a call using a telephone with LIFTER attached 7 Adjusting the RX (receive) volume To adjust follow these steps: 5 z The telephone rings z Make a telephone call and ask the person you are calling for their assistance.
PAGE 7
. Technical Features Radio Frequency Range 8. Optional Accessories 2,402 MHz ~ 2,478 MHz ISM (Industrial, Scientific, Medical ) Band Radio Frequency Modulation GFSK(Gaussian Frequency Shift Keying) Emission Type F1D Radio Frequency Tx Power (Max) 4.0 dBm (2.5 mW) Modulation Type Digital Modulation Channel Number 77 ch Operating range Up to 10 meter(Approx. 33 feet) Talk time Up to 13 hours Standby time Approx .
PAGE 8
Trouble Shooting repairs, commercial use or damages occurred in shipping. Exterior and interior finish, 1. lamps, glass, plastics parts and temperature probes are not covered under this warranty. Pairing does not work …… ☞ After setting headset and base unit OFF and ON, try again the pairing. Customer adjustment according to the owner’s manual are not covered under this warranty. This warranty is automatically void if the serial number is missing or altered.
PAGE 9