User Manual
14
WAN
The WWAN screen allows you to configure the Wireless WAN interface of the SkyZhone Repeater
Two types
of the WAN protocols are supported: Static and DHCP. (The Wireless WAN interface only takes
effect when you turn on the URE mode in the Wireless page.)
1.
C
o
nn
ec
t
i
o
n
:
Select the specified WAN connection to use. Before you can do this, at
least one WAN connection must be configured first. Click the New button to create
additional WAN connections. To delete a WAN connection, select the specified WAN
connection and then click the Delete button.
2.
D
e
5
c
r
i
pt
i
o
n
:
Enter the description of the specified WAN connection.
3.
P
ro
t
o
c
o
l
:
Select the desired WAN protocol or disable the WAN interface.
4.
P
r
i
m
a
r
y
:
Only primary WAN connection is active. Other WAN connections will be
disabled.
DHCP
Select DHCP from the Protocol list. The WAN interface will obtain all the necessary
information, such as IP address, subnet mask and default gateway, from the DHCP server located
in the network.
Static
You need to enter all the data manually to make your SkyZhone Repeater work properly.