User Manual
18
Filters
Use the Filters screen to create and apply filters that can selectively allow traffic to pass in and out
of your network.
Warning
Overwriting the factory default filters may result in your network clients not being
able to access the Internet. When you define new filters, we recommend that you
choose an empty row.
The Filters screen is shown in the figure below.
1.
L
A
N
M
A
C
F
i
l
t
e
r
M
o
d
e
:
Select whether clients with the specified MAC address are
allowed or denied access to the SkyZhone Repeater.
2.
L
A
N
MAC Filter5
:
Filter packets from LAN machines with the specified MAC addresses.
Enter the MAC address in the format of xx:xx:xx:xx:xx:xx.
After configuring filter mode and filtered MAC addresses, you must configure the conditions in the
table below.
1.
L
A
N
C
l
i
e
nt
F
i
l
t
e
r
5
:
Filter packets from IP address destined to certain port ranges
during the specified time.