User Manual

21
Wireless
The 2018R CPE uses a single physical wireless 802.11 interface to provide the virtual interfaces
which operate as both client station (STA) and access point (AP) simultaneously. The 2018R CPE
is an AP with its own basic service set (BSS) which is called D o w n 5 t r e a m B SS in this document.
Also, it acts as a STA to another AP called Up5tream BSS. Depending on the SkyZhone
Repeater configuration, the 2018R CPE URE feature can be used as two main sub-features:
T r a v el SkyZhone Repeater and SkyZhone Repeater . In both cases, Upstream BSS and
Downstream BSS must use the same channel.
Travel SkyZhone Repeater
To enable the T r a v el SkyZhone Repeater , the SkyZhone Repeater Mode in B a 5 i c page must be
set to SkyZhone Repeater . The
2018R CPE will do NAT between Upstream BSS and Downstream BSS.