User's Manual

66xx/67xx Router Users Guide 100
Policy Routing
The policy routing feature allows the administrator to have more control over how packets should
flow through the modem and into their networks. The feature allows administrator to route IP
packets according to their Source Interface; Source/Destination IP address/subnets; IP Protocols;
Source/Destination Ports to specific Gateway address and/or Gateway Interfaces.
To add a policy routing rule:
1. Click Add.
2. Enter a unique name for the rule in the Policy Name text box.
3. Select the interface to associate with the rule from the Physical LAN Port drop down.
4. Specify a Source IP Address.
5. Select the interface to use in the Use Interface drop down.
6. Specify a Default Gateway.
7. Click Save/Apply.
RIP
To enable RIP on an interface, open the Routing – RIP Configuration page.
Enter the RIP configuration and then click Apply/Save.