User's Manual

66xx/67xx Router Users Guide 141
To restrict a wireless bridge:
1. In the Wireless — Wireless Bridge screen select the access point mode from the AP Mode
dropdown.
AP Mode options are
Access Point
Wireless Bridge
2. From the Bridge Restrict dropdown select Enable, Disable
or Refresh (Enabled Scan. If
you have chosen to enable access point, in the Remote Bridges MAC Address text
box(es) MAC address(es) for the bridge(s).
3. If you have chosen access point Enabled (Scan), select the MAC addresses to restrict.
Note: The wireless repeater may be required to be configured with the same SSID as the gateway.