User's Manual

66xx/67xx Router Users Guide 167
IP Addresses
Web access to the router may be limited when Access Control Mode is enabled.
Note: Do not change this information unless you are instructed to by your ISP technician. Adding
or changing the settings on this page may cause you to lose management access to the router.
To add the IP address to the IP address list:
1. Click Add.
2. In the Add IP Addresses screen, assign the IP address of the management station that is
permitted to access the local management services, in the IP Address text box.
3. Enter the Subnet Mask.
4. Click Save / Apply.
5. In the Access Control: IP Address screen, select the IP address then select Enabled to
enable Access Control Mode.