User's Manual

66xx/67xx Router Users Guide 61
4. On the WAN Service Configuration page, select IP over Ethernet.
5. Optionally specify the 801.1P priority and 802.1Q VLAN tagging parameters, and then click
Next. For untagged service, set the parameter to -1 to both 802.1P and 802.1Q VLAN ID.
By default the 802.1P and 802.1Q values are set to -1, which means that the parameters
are ignored.
6. Specify the address type, IPv4 only or dual stack (IPv4 and IPv6).
The IPv6 option enables IPv6 on the WAN interface. Use only when IPv6 is required.
7. Click Next.
8. On the WAN IP Settings page you will need to enter information provided by your ISP, then
click Next.