User's Manual

66xx/67xx Router Users Guide 80
LAN VLAN Setup
The LAN VLAN setup provides a mechanism for subtending another 6xxx from a 6xxx. Using an
Ethernet link from the downstream device connected to an Ethernet port, you need to instruct the
6xxx to forward
On the subtended device set it up to use the LAN1 interface for the VLANs.
Following this example, you could set up the interfaces in this way:
the voice service is using the IPoE WAN service on VLAN 12 with 802.1P set to 7 (highest
priority)
the video service is using a bridge WAN service on VLAN 11 witth 802.P set to 1
internet service is using PPPoE WAN service on VLAN 10 with no setting on 801.1P (lowest
priority)
The interfaces from the example, as displayed in the Device Info | Summary screen: