User's Manual

66xx/67xx Router Users Guide 99
Routing
Under the Routing heading you assign a default gateway, create a routing table (in Static Route),
create routing policy rules, and activate Routing Information Protocol (RIP) on the device.
Default Gateway
You can enable an automatic assigned default gateway on the Routing – Default Gateway
screen or specify a static default gateway. By default, the router will use an available WAN
interface as the default gateway.
If you change the automatic assigned default gateway address, you must reboot the router for the
change to take effect.
Static Route
To add a routing table use the Static Route page. A maximum of 32 entries can be added.
1. Click Add.
2. Enter the route information and then click Apply/Save.