User Manual

User Manual
36
Figure 7 SIP Basic Setting
 Bound Interface Name: you can select the bound interface name from the
drop-down list.
 SIP Local Port: Set the SIP local port of the gateway, the default value is
5060. SIP local port is the SIP UA (user agent) port.
 SIP domain name: Enter the SIP domain name that you want to set.
 Use SIP Proxy: Select the checkbox of Use SIP Proxy, if your DSL router
uses a SIP proxy. SIP proxy allows other parties to call DSL router through it.
When it is selected, the following fields appear.
– SIP Proxy: The IP address of the proxy.
– SIP Proxy port: The port that this proxy is listening on. By
default, the port value is 5060.
 Use SIP Outbound Proxy: Some network service providers require the use
of an outbound proxy. This is an additional proxy, through which all outgoing
calls are directed. In some cases, the outbound proxy is placed alongside the
firewall and it is the only way to let SIP traffic pass from the internal network
to the Internet. When it is selected, the following fields appear.
– SIP Outbound Proxy: The IP address of the outbound
proxy.