Operator`s manual

Tally Dascom 2610

◆ Keys

1)【Online】

a) Every press on this switch toggles the status between Online and Offline. When the printer is

Online, it receives data from the host; while it is Offline, it stops the printing and signals the host to

stop sending data.

b) Press the key【Online】for the below operations:

 Before and after special setup: Most of the special setup requires Offline operation. A

press on【Online】key brings the printer Offline to carry out the special setup; after that,

pressing【Online】brings the printer back online.

 Halt the printing for error recovery: Pressing【Online】brings the printer Offline for error

recoveries like paper jam and so on. After the recovery, press【Online】to continue the

printing.

2)【Load/Eject】

If paper is already loaded:

Single sheet - - > The printer ejects the paper;

Tractor front and rear - - > The printer moves the paper in to Park position.

If paper is not loaded:

Transport the paper to the first print position (TOF).

3)【Speed】

Toggles between high speed and high quality print depending on menu settings.

4)【Tear】

When fanfold stationery are installed in an active tractor path, a press of this key advances the

perforation of the stationery to the cutting edge of the tear-bar. This key is invalid for cut sheets

and Top Pull Tractor.