Operator`s manual

Tally Dascom 2610
81
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
√ √ √
<ESC>*<4><n1> <n2> Set graphics print to 80 dpi
√ √ √
<ESC>*<40><n1> <n2> Set graphics print to 360 dpi
√
* * * *
<ESC>*MI>F Assign character set G2
√ √ √
<ESC>-<n> Underlining ON/OFF
√
<ESC>/<m> Select vertical tab channels
√
<ESC>. Printing raster graphics
√ √
<ESC>: Condensed printing 12 cpi ON
√ √
<ESC>:<0><n><m> Copy ROM character set
√ √
<ESC>< Unidirectional printing for 1 line
√ √
<ESC>= Set bit 8 = 0
√ √
<ESC>=<C1><C2>... Load font/character set
√ √
<ESC>> Set bit 8 = 1
√ √
<ESC>?<s><n> Reload a graphics mode
√ √
<ESC>@ Initialize printer
√
* * * *
<ESC>[ MTPL start character for programming
sequence
√
* * * *
<ESC>[:y Right justification and centering OFF
√
* * * *
<ESC>[=z Bold ON
√
* * * *
<ESC>[>z Bold OFF
√
* * * *
<ESC>[?1~ MTPL command set
√
* * * *
<ESC>[?10~ Barcode interpretation OFF
√
* * * *
<ESC>[?11~ Start barcode interpretation
√
* * * *
<ESC>[?4~ MTPL + IBM Proprinter-24 command set
√
* * * *
<ESC>[?50h Selecting character sets with 256 characters
√
* * * *
<ESC>[?50l Selecting character sets with 94 characters
√
* * *
<ESC>[?51h Proportional fonts automatic NLQ and LQ
√
* * *
<ESC>[?51l Proportional fonts in draft mode possible
√
* * * *
<ESC>[?52h
Font selection (ESC[10...19m]) possible only
for NLQ and LQ
√
* * * *
<ESC>[?52l Font selection (ESC[10...19m]) Draft
√
* * * *
<ESC>[?53h Extended character set
√
* * * *
<ESC>[?53l Standard character set
√
* * * *
<ESC>[?6~ MTPL + EPSON LQ-2550 command set
√
* * * *
<ESC>[?8~ MTPL + EPSON LQ-2170 command set
√
* * * *
<ESC>[?7h Line overrun = CR + LF