Operator`s manual

Tally Dascom 2610
86
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
√
* * * *
<ESC>[<n> v Set vertical tab
√ √
<ESC>[\<n1><n2> Perform relative horizontal step
√
<ESC>\<n1>;<n2> Transparent mode for the characters following
√
<ESC>^ Transparent mode for the character following
√
<ESC>_<n> Overline ON/OFF
√ √ √ √
<ESC>0 Set line feed to 1/8 inch
√
<ESC>1 Set line feed to 7/72 inch
√ √ √ √
<ESC>2 Set line feed to 1/6 inch
√
<ESC>2 Set line feed to n/72 inch
√ √ √
<ESC>3<n> Set line feed to n/180 inch
√
<ESC>3>n> Set line feed to n/216 inch
√ √
<ESC>4 Italics ON
√ √
<ESC>4 Set beginning of form
√ √
<ESC>5 Italics OFF
√ √
<ESC>5<n> Autom. line feed ON/OFF
√ √
<ESC>6 Print ASCII codes dec. 129 to dec. 159
√ √
<ESC>6 PC character set 2 (expanded)
√ √
<ESC>7 Suppress ASCII codes 129 to 159
√ √
<ESC>7 PC character set 1 (standard)
√
<ESC>a<n> Select orientation
√ √ √
<ESC>A<n> Line spacing n/60 inch
√
<ESC>A<n> Prepare line spacing n/72 inch
√
<ESC>b<m><0> Clear all tabs
√
<ESC>b<m><n><0> Set vertical tabs in channels
√ √ √ √
<ESC>B<0> Clear all vertical tabs
√ √
<ESC>B<n1>...<n16><0
>
Set vertical tabs
√ √
<ESC>B<n1>...<n64><0
>
Set vertical tabs
√
<ESC>c Reset to initialization status
√
<ESC>c Setting the horizontal motion index (HMI)
√ √ √ √
<ESC>C<0><n> Set form length in inches
√ √ √ √
<ESC>C<n> Set form length in lines
√ √ √
<ESC>d<n1> <n2> Perform relative horizontal step
√ √ √ √
<ESC>D<0> Clear all horizontal tabs
√ √ √ √
<ESC>D<n1>...<n32><0
>
Set horizontal tabs
√ √
<ESC><DC2> Condensed printing OFF
√ √
<ESC><DC4> Double-wide printing OFF (set with <SO> or <ESC><SO>)