User Guide User guide

Setting up the printer
2-6
3. Using the procedure below, release the roller from the LOCK position and turn
the ribbon feed knob clockwise to take up any ribbon slack. Push in the gray rib-
bon release tabs on the side of the ribbon cartridge to release them, and slide the
roller from the LOCK position to the FREE position.
Preparing the ribbon cartridge
CAUTION:Do not turn the ribbon feed knob in counterclockwise direction.
4. Verify that the power to the printer is off (make sure that the circle mark on the
power switch is pressed).
Verify that the printer is switched off
5. Move the paper thickness lever to the D position.
6. Open the front cover.
Ribbon feed knob
Turn the knob clockwise
Release tabs
Roller