User Guide User guide

Setting up the printer
2-10
2. Plug the other end of the power cord into the power outlet.
Connecting the power cord
3. Make sure that the power cord is securely connected.
4. Turn on the power by pressing the side marked “I” on the power switch. Within
a few seconds, the POWER indicator on the printer control panel will light, the
print head will move to its home position, and the ONLINE indicator will light
(green).
NOTE: If no forms are loaded, the printer may beep and the grenn FAULT indicator
may light and the ONLINE indicator will not light if the paper select lever is
set backward to the continuous forms position. Move the paper select lever
forward to the single sheet position (as described in the next section). The
FAULT indicator will go out. This condition is a result of the factory default
settings and poses no problem.