User Guide User guide

Setting up the printer
2-21
Resume printing after
paper-out
Off Not printing On Load paper.
Place printer in Ready
state
Off Not printing Off Press Pause.
Place printer in pause
state
On — Off Press Pause.
Enter Normal mode N/A N/A N/A Turn power on without
pressing any buttons
Continuous Test Print N/A N/A N/A Turn power on while press-
ing FF/Load.
Enter Macro selection
mode
Select Macro 1
4
Select Macro 2
4
Off
Off
Off
Press Protocol(M1) and
Park(M2).
Press M1
Press M2.
Switch the protocol
4
— Not printing Off Press Protocol.
Enter Top-of-Form
Adjustment mode
— Not printing Off Press LF button and FF/
Load button.
Move paper by
1/60inch
Off — Off Press
 or  button.
Use the adjustment
temporarily
Off — Off Press Set-Up/Quit.
Use the adjustment
permanently
Off — Off Press Exit/Save.
Clear the adjustment Off — Off Press Top buttons.
Enter Set-Up mode N/A N/A N/A Hold the Setup/Quit buttons
depressed and switch the
printer on.
Move cursor to select
a Set-Up Function or
Value
Off Not printing Off Press
 or  button.
Move cursor to select
a Set-Up Option
Off Not printing Off Press
 or  button.
Select a Set-Up
Function or Value
Off Not printing Off Press
 or  button.
Operation
Required Conditions
1
Required Action
Ready Printing
2
Fault