User Guide User guide

Paper Handling
3-4
The following table summarizes the use of levers and buttons in paper handling.
More detailed information is provided later in this chapter.
CAUTION: To load or feed paper, the printer must be:
– In the Ready state but not receiving or printing data
– In the Pause state
Levers and Buttons Used for Paper Handling
Lever/Button Purpose Action
FF/LOAD Form feed
Load paper
Press FF/Load to execute a form
feed. Continuous forms are fed for-
ward by one page. Single sheets are
ejected.
Press FF/Load to feed paper to the
top of form position.
LF Line feed Press LF to feed paper forward by
one line.
Park Unload forms Press Park to retract continuous
forms to the “park position.”
LF + FF/LOAD Enter Top-of-Form (TOF)
Adjustment mode
Press LF and FF/LOAD buttons at
the same time to enter TOF Adjust-
ment mode where the paper loading
position can be adjusted.

Increase TOF value by
1/60 inch
Press the  button to feed paper for-
ward by 1/60 inch in TOF Adjustment
mode.

Decrease TOF value by
1/60 inch
Press the  button to feed paper
backward by
1/60 inch in TOF Adjustment mode.
Exit/Save Save TOF value Press Exit/Save to permanently store
the TOF position adjusted by the

button and the
 button in TOF
Adjustment mode.
Top Clear TOF adjustment Press the Top buttons at the same
time to clear the adjusted value and
return to the initial state.