User Guide User guide

Paper Handling
3-21
3. Adjust the Top-of-Form value:
 To increase the Top-of-Form value of a 1/60 inch, press the  button.The pa-
per moves forward.
 To decrease the Top-of-Form value of a 1/60 inch, press the  button.The pa-
per moves backward.
 To reset the Top-of-Form value to 0, press the Top button. The paper moves
to the edge of the page (position 0).
NOTE: If you reach the limit of the permitted range, the printer beeps, and the paper
stops moving.
4. Save the Top-of-Form value:
 To permanently save the value, press the Exit/Save button. The printer returns
to Normal mode.
 To temporarily save the value, press the Set-Up/Quit button. The printer re-
turns to Normal mode. (The new value is lost at the next power-off.)
NOTE: The use of the  and  buttons for micro-feeding is available for some
cases of software errors (Fault indicator blinking).
NOTE: If you want to clear the adjusted TOF position and to return to the initial
state, press the Top buttons at the same time.