User Guide User guide

Printing
4-2
Using the Control Panel
This printer can directly select some print features from the control panel. These fea-
tures, listed on the control panel, are two predetermined sets (macros) of print fea-
tures and three protocols. Use the following procedures to select Macros and
Protocols:
Macrol selection
1. Press the Protocol M1 and the Park M2 buttons simultaneously to enter Macro
selection mode. The M1/M2 indicator starts blinking.
2. Then press within 3 seconds Protocol M1 button to select macro 1 or Park M2
button to select macro 2. If macro 1 is selected, the M1/M2 indicator lights, if
macro 2 is selected the M1/M2 indicator is off.
Macro select mode
3. Press the Pause button to return the printer to the Ready state. You are ready to
print using the selected macro.
NOTE: The active Macro at power-off remains active at next power-up.