User Guide User guide

Using Set-Up Mode

5-4

Overview of the Set-Up Mode

When you enter the Set-Up mode, the following <FUNCTIONS> menu is printed:

The following table summarizes the purpose of each function.

Set-Up Mode Functions

To select a function from the <FUNCTIONS> menu:

1. Repeatedly press the  button or the  button to position the red cursor on the

plastic print guide under the function you require.

2. Press the  button or the  button to select the function. If the function has

options and values, the printer prints the first option and its values.

The MACRO 1, MACRO 2, INSTALL, ADJUST, TESTS, and MENU-

ACCESS functions contain options that have selectable values. The other func-

tions have neither options nor values.

Function Purpose

MACRO 1 and MACRO 2 Assigns print features to MACRO 1 and MACRO 2

PRINT Prints the Printer Configuration

INSTALL Changes the Set-Up menu language, computer inter-

face, and paper feed control options

ADJUST Changes the top-of-form fine adjustment options

TESTS Runs the printing test and hex dumps

RCALL-FACT Resets factory settings in MACRO 1, MACRO 2,

INSTALL and ADJUST

MENU-ACCESS Restricts access to Set-Up functions from the control

panel

SAVE&EXIT Exits the Set-Up mode and saves any changes made

in the Set-Up mode

MACRO 1 MACRO 2 PRINT INSTALL ADJUST TESTS RCALL-FACT MENU-ACCESS SAVE&EXIT