User Guide User guide

Using Set-Up Mode

5-8

2. Select the Macro 2 function.

Wait for the printer to stop printing. Then press the

 button once to position

the red cursor on the plastic guide of the print head under MACRO 2. Press the

 button or the  button to select the Macro 2 function and print the <PROTO-

COL> option and its values.

3. Print the menu of the left margin option.

Since you only want to change the left margin, press the

 button to select the

current protocol. The bolded PORT DEPND is underlined, and the next option

<PRTCL SERL> is printed. (The bolded value indicates the current setting, and

the underlined value is the new setting.) Repeatedly press the

 button until the

<LEFT MARGN> option and its value are printed.

4. Change the left margin from column 1 to column 20.

Press and hold the

 button until the printer beeps nineteen times. When the

button is released, the new value is printed next to the current value. If the new

value is not 20 COL, repeat this operation. If it is 20 COL, press thebutton to

select 20 COL. 20 COL is underlined, and the next option, <TOP OF FRM>,

and its value are printed.

5. Exit the Macro 2 function.

Since you do not want to make any other changes in MACRO 2, press the Exit/

Save button. The <FUNCTIONS> menu is then reprinted, and the red cursor is

positioned beneath SAVE&EXIT.

6. Exit the Set-Up mode, saving or not saving the new left margin.

Press the

 button or the  button to save 20 columns as the new power-on

default in Macro 2 and exit Macro 2. The printer then exits the Set-Up mode and

returns to the Ready state. These settings remain in effect until the next time they

are changed.

Press the Set-Up/Quit button if you do not intend saving these settings in

Macro 2.

Options with Both Pre-determined and Undetermined Values

Some options include both types of values. Undetermined values appear at the end

of the list of pre-determined values, identified by the unit of the corresponding range.

For example, when you select the <FORM LENGH> option (Form Length), the fol-

lowing menu is printed:

3 INCHES 3.5 INCHES 4 INCHES 5.5 INCHES 6 INCHES 7 INCHES 8 INCHES

8.5 INCHES 11 INCHES

11 2/3INCH 12 INCHES 14 INCHES 15 INCHES No of LINE