User Guide Owner manual

User guide The control panel

Setup mode In this mode, the following settings are available:

` Setup key: Sets the printer to setup mode, in which the following

settings can be selected:

` Menu key (1): Other menu settings. Acces may be disabled by

the manufacturer (see note below).

` Adjust key (2): Sets the Tear position, first printing line and print

head gap.

` Paperway key (3): Sets the Paper path.

` Char key (4): Sets the font and the number of characters per

inch.

Access to the other menu settings (Menu) may be disabled by

the manufacturer.

Proceed as follows to release this lock temporarily.

1 Switch off the printer for approx. 5 seconds.

2 Switch the printer on again keeping the Setup key pressed.

For information on how to enable access permanently and

about the available settings, refer to the section (see

Menu lock

(MenLock), page 62) and (see Menu parameters, page 47).

Adjust Paperway

Menu Char

Online

Setup