Use and Care Manual

Before First Use
Using Your Blender
• Read the entire instruction manual and save it for further use.
• Remove any stickers and packaging before use.
• Use a wet cloth to wipe down the main base.
• Wash the tamper, measuring cup, lid, and pitcher with soapy
water and a sponge.
WARNING: DO NOT SUBMERSE THE MAIN BASE IN WATER OR
ANY LIQUID. MAKE SURE THE BLENDER IS UNPLUGGED.
• Place the main base on a stable surface and plug it in.
• Place the pitcher on the main base. There should be a beep to
indicate it is in place.
• Place the ingredients for what you are making into the pitcher.
Put liquid ingredients in first, then powdered ingredients, and
then solid ingredients.
• Make sure the lid is securely in place before engaging
the appliance.
• Press the power button to turn the blender on.
• You can either choose one of the pre-set dial modes, or choose
your own speed and time. If you are choosing your own speed
and time, set the pre-set dial on the Manual Setting
(middle setting).
• Follow the “Blender Settings Guide” section to accurately
choose the right setting.
• Press the power button again to start the blender.
• Use the tamper to make sure all the ingredients are mixed
in properly.
• After you are finished blending, unplug the blender.
• Clean the pitcher immediately after each use.
• You can use the Rinse setting to make cleaning easier.
NOTE: ALWAYS MAKE SURE LID IS SECURE BEFORE
BLENDING. NEVER PLACE ANY PARTS OF YOUR BODY IN
THE BLENDER WHEN IN USE.