User manual
- 57 -
DOME SETTINGS
-------------------------------------------
Auto Flip ：ON
Auto Stop Time ：30Sec
Menu OFF Time ：5Min
Tilt Angle Set ：-5
Speed Level ：Auto
<Idle Action>
<Next Page>
Back
Exit
IDLE ACTION
-------------------------------------------
Time ：30Sec
Action ：None
Back
Exit
A1
B1
A1：Time
Move the cursor to the "Time", Press iris on to setup "Time”, select "ON/OFF” through
moving the joystick. Press iris on to confirm
B1： Action
Move the cursor to the "Action", Press iris on to setup "Action”, select "preset 1/scan 1/
cruise 1/ pattern 1/ no action” through moving the joystick. Press iris on to confirm.
G： Next Page
Move the cursor to “next page” to ender next page submenu
DOME SETTINGS
-------------------------------------------
Auto Flip ：ON
Auto Stop Time ：30Sec
Menu OFF Time ：5Min
Tilt Angle Set ：-5
Speed Level ：Auto
<Idle Action>
<Next Page>
Back
Exit
DOME SETTINGS
-------------------------------------------
Temperature Mode ：Auto
<Origin Set>
<North Set>
Back
Exit
A1
B1
C1
A1：Temperature mode
Move the cursor to the “Temperature mode ", Press iris on to setup “Temperature mode”,
select "fan/off/anti fog/heat/auto” through moving the joystick. Press iris on to confirm.
B1： Origin Set
Move the cursor to the “Origin Set ", Press iris on to setup “Origin Set”, select a 0 point
through moving the joystick. Press iris on to confirm.
C1： North set
Move the cursor to the “North Set ", Press iris on to setup “North Set”, select a direction to