User Manual

ALARMS
PatientNet Operator’s Manual, v1.04, 10001001-00X, Draft 125
All information contained herein is subject to the rights and restrictions on the title page.
Ventilator Patients Alarms
Alarm Label Alarm Name Triggering Condition
HI PRESS high pressure limit see ventilator operator’s manual
LO INS PRES low inspiration pressure see ventilator operator’s manual
LOW PEEP Low PEEP/CPAP see ventilator operator’s manual
LOW EX VT low exhaled tidal vol-
ume
see ventilator operator’s manual
LOW EX MV low exhaled min. vol-
ume
see ventilator operator’s manual
HI RESP high respiratory rate see ventilator operator’s manual
LoPresO
2
In low pressure O
2
inlet see ventilator operator’s manual
LoPresAirIn low pressure inlet see ventilator operator’s manual
HI SpO
2
high SpO
2
see ventilator operator’s manual
LO SpO
2
low SpO
2
see ventilator operator’s manual
HIGH PULSE high HR see ventilator operator’s manual
LOW PULSE low HR see ventilator operator’s manual
APNEA ALM apnea alarm see ventilator operator’s manual
EX VALVE LK exhalation valve leak see ventilator operator’s manual
I:E RATIO I:E ratio see ventilator operator’s manual
ALMS SILENC alarms silenced see ventilator operator’s manual
AIRPRESSDIS airway pressure discon-
nect
see ventilator operator’s manual
DEV LOWBATT low device battery low battery level in the ventilator
SVO DUE LSP SVO due to LSP see ventilator operator’s manual
CHK PATIENT check patient ventilator device alarm not supported by V-Link/
V-Link II/Instrument Transceiver is triggered
?? SOURCE source data from ventilator does not match selected device
type
SpO
2
ERR SpO
2
error equipment SpO
2
failure, uncalibrated
NO SpO
2
NO SpO
2
SpO
2
not detected
APNEA VENT apnea ventilation see ventilator operator’s manual
NURSE nurse remote button on the transceiver was pressed
LOW BATT low transceiver battery low battery level on the Instrument Transceiver
NO SIGNAL no signal no signal received from the transceiver
WRONG ID wrong ID incompatible transceiver ID
EDIT edit number of history events has reached its limit
ATT PRESENT attendant present called when pressed on transceiver