Service Manual

AlarmView™ Service and Installation Manual
Page 16
If no bed number was selected before the “Program” button was
tapped, the AlarmView Programmer will post the following
message in an advisory dialog box.
You must select or get a
bed number.
If no cap code was selected before the “Program” button was
tapped, the AlarmView Programmer will post the following
message in an advisory dialog box.
You must select or get one
or more pagers.
If the Programmer could not program the transmitter, the
AlarmView Programmer will post the following status message
on the top middle of the Programmer screen.
Programming Failed