Service Manual

AlarmView™ Service and Installation Manual

Page 54

Survey Pages

The Survey Mode is a mode in which frequent periodic pages

are sent from the transmitter to the assigned pager(s). This

mode can be used to determine areas of coverage for the

system. To begin the Survey Mode, turn on the transmitter, as

described above. The transmitter should not be attached to any

patient monitoring equipment as this point. The LED on the front

of the transmitter will be ORANGE to indicate that the transmitter

is attempting to establish communications with the patient

monitoring equipment. Press the button on the top of the

transmitter, and hold the button down for approximately 5

seconds. A numbered “Survey Page” will be sent. Every 15

seconds, another “Survey Page” will be sent. This will continue

until one hundred pages have been sent. To stop the survey

mode before one hundred pages have been sent, press the

button on the top of the transmitter, and hold the button down for

approximately 5 seconds.

Pages sent during the Survey Mode will have a line of data,

which will indicate that the Survey Mode is in process.

Pages sent during the Survey Mode will contain the following

data:

Bed Number

Transmission Number (in sequence)