User Manual

AlarmView™ System Administrator’s Manual
880-0326-01 REV. A Page 43
c. To change the Global Cap Code, tap the All Pagers label,
then OK, and use the keyboard to type in a new Global Cap
Code.
7. Aim the programmer’s infrared port directly at the infrared
port on the front of the transmitter and tap SEND to program
the configuration changes into the transmitter.
8. Repeat programming for every transmitter in the system.
9. Tap Exit to return to SysMgr.
Changing Reminder Page Interval
If the alarm condition continues or is not silenced at the monitor,
a Reminder Page is sent to all pagers in the system. To change
the delay interval for the reminder page:
1. From SysMgr, tap the Start button and tap Install Program.
2. Enter your password. The Alarms screen will be displayed.
Alarms Screen Reminder Page Interval
3. To send a reminder page after a certain interval, tap the
Down Arrow in the Sec. field.