User Manual &#. 1/7 *OUFMÚ "UPN %VBM $PSF w .JOJ .PEVMF XJUI *OUFMÚ *$) . $IJQTFU Version March 201 Data Modul AG - www.data-modul.
EBM-PNV FCC Statement THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
User’s Manual otherwise specified. Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification. Life Support Policy Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF Avalue Technology Inc. As used herein: 1.
EBM-PNV If you still cannot find the answer, gather all the information or questions that apply to your problem, and with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the support you need to get the most from your Avalue’s products. In fact, most problems reported are minor and are able to be easily solved over the phone. In addition, free technical support is available from Avalue’s engineers every business day.
User’s Manual Product Warranty Avalue warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Avalue, or which have been subject to misuse, abuse, accident or improper installation.
EBM-PNV Contents 1.1 Safety Precautions ....................................................................................................9 1.2 1.3 Packing List...............................................................................................................9 Document Amendment History ...............................................................................10 1.4 Manual Objectives...................................................................................................
User’s Manual 2.4.25 OSD for front panel key (JKEY) ................................................................................................. 41 3.1 Introduction .............................................................................................................43 3.2 3.3 Starting Setup .........................................................................................................43 Using Setup ..................................................................................
EBM-PNV 3.3.7.4 Load Optimal Defaults ............................................................................................................... 72 3.3.7.5 Load Failsafe Defaults ............................................................................................................... 72 4.1 Install Chipset Driver (For Intel ICH8-M) .................................................................74 4.2 4.3 Install Display Driver (For Intel Pineview).........................................
User’s Manual 1. Getting Started 1.1 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
EBM-PNV 1.3 Document Amendment History Revision st 1 Date Comment August 2010 Initial Release 10 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 1.4 Manual Objectives This manual describes in detail the Avalue Technology EBM-PNV Single Board. We have tried to include as much information as possible but we have not duplicated information that is provided in the standard IBM Technical References, unless it proved to be necessary to aid in the understanding of this board. We strongly recommend that you study this manual carefully before attempting to interface with EBM-PN series or change the standard configurations.
EBM-PNV 1.5 System Specifications System CPU Onboard Intel® Atom™ Dual-Core D525 1.8 GHz CPU FSB 667/800MHz BIOS AMI 8Mbit Flash BIOS System Chipset Intel® ICH8-M Chipset (2.4W) I/O Chip Winbond W83627DHG Onboard 1GB up to 2GB & one 204-pin DDR3 SODIMM supports up to System Memory 2GB DDR3 800 SDRAM. SSD One CompactFlash Type I/II Socket Watchdog Timer Reset: 1 ~ 255min. and 1sec. or 1min./step Monitoring System Temperature, Voltage, and Cooling H/W Status Monitor Expansion Fan Status.
User’s Manual Audio AC97 Codec Realtek ALC888 Supports 5.1-CH Audio Audio Interface Mic-in, Line-in, Line-out Audio Amplifier 2 x 2W Ethernet LAN 1 Intel® 82574L PCI-E Gigabit Ethernet Intel® 82574L PCI-E Gigabit Ethernet LAN 2 Ethernet Interface (Optional 1 x PS/2 Keyboard & Mouse) 1000 Base-Tx Gigabit Ethernet Compatible Mechanical & Environmental Power Consumption +12V @ 1.
EBM-PNV 1.6 Architecture Overview – Block Diagram The following block diagram shows the architecture and main components of EBM-PNV. 14 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2. Hardware Configuration EBM-PNV User’s Manual 15 Data Modul AG - www.data-modul.
EBM-PNV 2.1 Product Overview 16 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.2 Installation Procedure This chapter explains you the instructions of how to setup your system. 1. Turn off the power supply. 2. Insert the SODIMM module (be careful with the orientation). 3. Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat panel. A CRT monitor must be connected in order to change CMOS settings to support flat panel. 4. Connect power supply to the board via the ATXPWR. 5. Turn on the power. 6.
EBM-PNV 2.2.1 Main Memory EBM-PNV provides one 200-pin SODIMM socket support up to DDR2 SDRAM and onboard 1GB DDR2 667 SDRAM. The total maximum memory size is 3GB. SODIMM Make sure to unplug the power supply before adding or removing SODIMMs or other system components. Failure to do so may cause severe damage to both the board and the components. • Locate the SODIMM socket on the board. • Hold two edges of the SODIMM module carefully. Keep away of touching its connectors.
User’s Manual • Align the notch key on the module with the rib on the slot. • Firmly press the modules into the socket automatically snaps into the mounting notch. Do not force the SODIMM module in with extra force as the SODIMM module only fit in one direction. Notch Key Mounting Notch Ejector 200-pin DDR2 SODIMM • To remove the SODIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the SODIMM module.
EBM-PNV 2.3 Jumper and Connector List You can configure your board to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
User’s Manual Connectors Label Function Note BAT Battery connector 2 x 1 wafer, pitch 1.25mm CFCARD Compact Flash card connector COM1 Serial Port 1 connector D-sub 9 pin, male CPU_FAN CPU fan connector 3 x 1 wafer, pitch 2.54mm DIMM 200-pin DDR2 SODIMM socket JAUDIO Audio connector 6 x 2 header, pitch 2.0mm JBKL1 LCD Inverter connector 5 x 1 wafer, pitch 2.0mm JBKL2 LCD Inverter connector 5 x 1 wafer, pitch 2.0mm JCOM2 Serial Port 2 connector 5 x 2 header, pitch 2.
EBM-PNV SATA2 Serial ATA connector 2 SATA3 Serial ATA connector 3 USB1 USB connector 0&1 VGA VGA connector D-sub 15-pin, female 22 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4 Setting Jumpers & Connectors 2.4.1 Clear CMOS (JBAT) Protect* Clear CMOS * Default 2.4.2 Multi-function select (SW1) ON OFF 1 AT SEL ATX SEL 2 CF Master CF Slave 3 Touch off Touch on 4 Touch: 4W Touch: 5W 5 GPIO32:L GPIO32:H 6 GPIO33:L GPIO33:H EBM-PNV User’s Manual 23 Data Modul AG - www.data-modul.
EBM-PNV 2.4.3 Serial port 1/ 2 - RS-232/ 422/ 485 mode select (SW2) In Serial Port 1 mode RS-232 RS-422 RS-485 1 ON OFF OFF 2 OFF ON OFF 3 OFF OFF ON In Serial Port 2 mode 2.4.4 RS-232 RS-422 RS-485 4 ON OFF OFF 5 OFF ON OFF 6 OFF OFF ON Serial port 1/ 2 pin9 signal select (JRI1/ JRI2) Ring* +12V JRI2 JRI1 +5V * Default 24 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.5 Serial port 1/ 2 RS-232/ 422/ 485 mode select (JP1/ JP2) RS-232* JP2 JP1 RS-422/ 485 * Default EBM-PNV User’s Manual 25 Data Modul AG - www.data-modul.
EBM-PNV 2.4.6 LCD backlight brightness adjustment (JVR1) Mode1: VR type Mode 2: DC type* * Default Signal PIN PIN Signal +5V 1 2 DC VR 3 4 VR GND 5 6 PWM Note: DC: 0V ~5V Mode 3: Pulse-Width Modulated type Variation Resistor (Recommended: 4.7KΩ, >1/16W) Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JBKL1. Please see the JBKL1 section for detailed circuitry information.
User’s Manual 2.4.7 LCD backlight brightness adjustment (JVR2) Mode1: VR type Mode 2: DC type* * Default Note: DC: 0V ~5V Signal PIN PIN Signal +5V 1 2 DC2 VR 3 4 VR GND 5 6 PWM2 Mode 3: Pulse-Width Modulated type Variation Resistor (Recommended: 4.7KΩ, >1/16W) Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JBKL2. Please see the JBKL2 section for detailed circuitry information.
EBM-PNV 2.4.8 2.4.9 Power connector (PWR2) Signal PIN PIN Signal VIN 4 3 VIN GND 2 1 GND Serial ATA power connector (S_PWR1) 28 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.10 LCD Inverter connector (JBKL1/ JBKL2) Signal PIN +5V 5 BRIGHT 4 BLK_ON 3 GND 2 +12V 1 JBKL1 JBKL2 Note: For inverters with adjustable Backlight function, it is possible to control the LCD brightness through the VR signal controlled by JVR1/ JVR2. Please see the JVR1/ JVR2 section for detailed circuitry information. 2.3.8.1 Signal Description – LCD Inverter Connector (JBKL1/ JBKL2) Signal Signal Description BRIGHT Vadj = 0.75V ~ 4.25V (Recommended: 4.
EBM-PNV 2.4.11 Battery connector (BAT) 30 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.12 Optional LPT connector (PRINT) PRINT (Rear side) Signal PIN GND 20 GND 19 GND 18 SLIN# 17 PAR_INIT# 16 ERR# 15 AFD# 14 SLCT 13 PE 12 BUSY 11 ACK# 10 PTD7 9 PTD6 8 PTD5 7 PTD4 6 PTD3 5 PTD2 4 PTD1 3 PTD0 2 STB- 1 EBM-PNV User’s Manual 31 Data Modul AG - www.data-modul.
EBM-PNV 2.4.13 Serial port 1 connector (COM1) In RS-232 Mode Signal PIN PIN Signal DCD1 1 2 RxD1 TxD1 3 4 DTR1 GND 5 6 DSR1 RTS1 7 8 CTS1 RI1 9 NC In RS-422 Mode Signal PIN PIN Signal TxD1- 1 2 RxD1+ TxD1+ 3 4 RxD1- GND 5 6 NC NC 7 8 NC NC 9 NC In RS-485 Mode Signal PIN PIN Signal DATA1- 1 2 NC DATA1+ 3 4 NC GND 5 6 NC NC 7 8 NC NC 9 32 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.14 2.4.15 CPU fan connector (CPU_FAN) Signal PIN FAN_TAC1 3 +12V 2 GND 1 Audio connector (JAUDIO) Signal PIN PIN Signal APM_LOUT_R 1 2 APM_LOUT_L GND 3 4 GND LINEIN_R 5 6 LINEIN_L MIC-R 7 8 MIC-L FRONT-JD 9 10 LINE1-JD MIC1-JD 11 12 GND EBM-PNV User’s Manual 33 Data Modul AG - www.data-modul.
EBM-PNV 2.4.16 Serial port 2 connector (JCOM2) In RS-232 Mode Signal PIN PIN Signal DCD2 1 2 RxD2 TxD2 3 4 DTR2 GND 5 6 DSR2 RTS2 7 8 CTS2 RI2 9 10 NC In RS-422 Mode Signal PIN PIN Signal TxD2- 1 2 RxD2+ TxD2+ 3 4 RxD2- GND 5 6 NC NC 7 8 NC NC 9 10 NC In RS-485 Mode Signal PIN PIN Signal DATA2- 1 2 NC DATA2+ 3 4 NC GND 5 6 NC NC 7 8 NC NC 9 10 NC 34 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
2.4.17 User’s Manual Serial port 3/ 4/ 5/ 6 connector (JCOM3/ JCOM4/ JCOM5/ JCOM6) JCOM3 JCOM4 JCOM5 JCOM6 Signal PIN PIN Signal DCD 1 2 RxD TxD 3 4 DTR GND 5 6 DSR RTS 7 8 CTS RI 9 10 NC EBM-PNV User’s Manual 35 Data Modul AG - www.data-modul.
EBM-PNV 2.4.18 General purpose I/O connector (JDIO) Signal PIN PIN Signal DIO0 1 2 DIO10 DIO1 3 4 DIO11 DIO2 5 6 DIO12 DIO3 7 8 DIO13 DIO4 9 10 DIO14 DIO5 11 12 DIO15 DIO6 13 14 DIO16 DIO7 15 16 DIO17 SMB_CLK_S 17 18 SMB_DATA_S GND 19 20 +5V 36 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.19 LED indicator connector (JLED) Signal PIN PIN Signal GND 1 2 +3.3V HD_ACT# 3 4 +3.3V LAN1_ACT 5 6 3.3V_SB LAN2_ACT 7 8 3.3V_SB ROUT- 9 10 ROUT+ LOUT- 11 12 LOUT+ PWRBTN# 13 14 GND EBM-PNV User’s Manual 37 Data Modul AG - www.data-modul.
EBM-PNV 2.4.20 LVDS connector (JLVDS1) Signal PIN PIN +5V 2 1 +5V 4 3 2 Signal +3.3V +3.
User’s Manual 2.4.21 LVDS connector (JLVDS2) Signal PIN PIN Signal +5V 2 1 +3.3V +5V 4 3 +3.
EBM-PNV 2.4.22 Touch panel connector (JTOUCH) Signal PIN UL 1 UR 2 PROBE 3 LR 4 LL 5 NOTE: Under 4W situation UL=X+, UR=Y+, LR=Y-, LL=X- 2.4.23 USB connector 4&5, 2&3, 6&7 (JUSB1/ JUSB2) JUSB2 JUSB1 Signal PIN PIN Signal +5V 1 2 GND D- 3 4 GND D+ 5 6 D+ GND 7 8 D- GND 9 10 +5V 40 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 2.4.24 2.4.25 USB connector 9 (JUSB4) Signal PIN +5V 1 D- 2 D+ 3 GND 4 GND 5 +3.3V 6 OSD for front panel key (JKEY) Signal PIN GND 1 K-LED_GREEN 2 K-LED_RED 3 K-POWER 4 K-AUTO 5 K-MENU 6 K-RIGHT 7 K-LEFT 8 EBM-PNV User’s Manual 41 Data Modul AG - www.data-modul.
EBM-PNV 3. BIOS Setup 42 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.1 Introduction The BIOS setup program allows users to modify the basic system configuration. In this following chapter will describe how to access the BIOS setup program and the configuration options that may be changed. 3.2 Starting Setup The AMI BIOS™ is immediately activated when you first power on the computer. The BIOS reads the system information contained in the CMOS and begins the process of checking out the system and configuring it.
EBM-PNV 3.3 Using Setup In general, you use the arrow keys to highlight items, press to select, use the PageUp and PageDown keys to change entries, press for help and press to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard.
User’s Manual 3.4 Getting Help Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press or the F1 key again. 3.5 In Case of Problems If, after making and saving system changes with Setup, you discover that your computer no longer is able to boot, the AMI BIOS supports an override to the CMOS settings which resets your system to its defaults.
EBM-PNV 3.6 BIOS setup Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and exit choices. Use the arrow keys to select among the items and press to accept and enter the sub-menu. 3.5.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 3.5.1.1 System Time Use the system Date option to set the system date.
User’s Manual 3.5.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. EBM-PNV User’s Manual 47 Data Modul AG - www.data-modul.
EBM-PNV 3.5.2.1 CPU Configuration Item Options Description Disabled, This item allows you to limit CPUID maximum Enabled value. Execute-Disable Bit Disabled, This item allows you to enable or disable the Capability Enabled No-Execution page protection technology. Hyper Threading Disabled, This item allows you to enable or disable Technology Enabled Intel® Hyper Threading technology. Disabled, This item allows you to enable or disable Enabled Intel® SpeedStep™ tech.
User’s Manual 3.5.2.2 IDE Configuration Item Options Disabled, ATA/ IDE Configuration Compatible, Enhanced IDE, Configure SATA as RAID, AHCI Description This can be configured as Disabled, Compatible or Enhanced. Use the configure SATA as BIOS option to configure the SATA port as an IDE drive, a SATA drive (AHCI mode) or a SATA drive in a RAID configuration.
EBM-PNV 3.5.2.2.1 AHCI Configuration While entering setup, BIOS auto detects the presence of IDE devices. This displays the status of auto detection of IDE devices. Item SATA Port 0/ 1/ 2 S.M.A.R.T. Options Auto, Not Installed Description Serial port 0/ 1/ 2 mode select. Disabled, Select the smart monitoring, analysis, and Enabled reporting technology. 50 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.5.2.3 Super I/O Configuration You can use this item to set up or change the Super IO configuration for FDD controllers, parallel ports and serial ports. Item Options Description Disabled, Serial Port 1/ 2/ 3/ 4/ 5/ 6 3F8, 2F8, This item allows you select serial port 1 ~ 6 of Address 3E8, 2E8, base addresses. 2F0, 2E0 Serial Port 2/ 5/ 6 Type Serial Port 3/ 4/ 5/ 6 IRQ 422, This item allows you select serial port 2/ 5/ 6 of 485 type.
EBM-PNV 3.5.2.4 Hardware Health Configuration This section allows you to control H/W monitoring. 3.5.2.5 ACPI Settings You can use this item to set up ACPI Configuration. Please refer to 3.5.2.5.1 ~ 3.5.2.5.3 for more details. 52 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.5.2.5.1 General ACPI Configuration Item Options S1 (POS), Suspend Mode S3 (STR), Auto Repost Video on S3 Resume Deep S5 Description Select the ACPI states used for system suspend. No, This item allows you to invoke VGA BIOS Yes POST on S3/ STR resume. Disabled, All PME/ wakeup event will be disabled in S4/ Enabled S5 mode when enabled DEEP S5. Note: Deep S5=ErP ErP mode: 1. No Timer-Power-On 2. No Wake On Ring/ LAN EBM-PNV User’s Manual 53 Data Modul AG - www.data-modul.
EBM-PNV 3.5.2.5.2 Advanced ACPI Configuration Item Options ACPI v1.0, ACPI Version Features ACPI v2.0, ACPI v3.0 ACPI APIC support AMI OEMB table Headless mode Description This item allows you enable RSDP pointers to 64-bit fixed system description tables. Enabled, Include APIC table pointer to RSDT pointer Disabled list. Enabled, Include OEMB table pointer to R(x)SDT Disabled pointer list. Disabled, Enable/ Disable Headless operation mode Enabled through ACPI.
User’s Manual 3.5.2.5.3 Chipset ACPI Configuration Item Energy Lake Feature APIC ACPI SCI IRQ USB Device Wakeup From S3/ S4 High Performance Event Timer Options Description Disabled, This item allows selecting energy lake feature Enabled mode. Disabled, This item allows to enable/ disable APIC ACPI Enabled SCI IRQ. Disabled, This item allows selecting USB device wakeup Enabled mode. Disabled, This section helps to set high performance Enabled event timer.
EBM-PNV 3.5.2.6 USB Configuration The USB configuration menu is used to read USB configuration information and configure the USB setting. Item Options Description Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, Enabled, Legacy USB Support Disabled, Auto any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
User’s Manual 3.5.2.7 APM Configuration The APM Configuration menu allows the advanced power management options to be configured. Item Restore on AC Power Loss by IO Options Power On, Power Off, Last State Description Use this to set up the system response after a power failure. Use the Resume on Ring BIOS option to Resume On Ring Disabled, Enabled enable activity on the RI (ring in) modem line to rouse the system from a suspend or standby state.
EBM-PNV 3.5.3 Advanced PCI/ PnP Settings Item Options Description Set this value to force the BIOS to clear the Clear NURAM No, Non-volatile Random Access Memory Yes (NVRAM). The Original and Fail-Safe default setting is No. When set No, BIOS configures all the device Plug & Play O/S No, Yes in the system. When set to Yes and if you still a Plug and Play operating system, the operating system configures the plug and Play device not required for boot.
User’s Manual PCI IDE BusMaster Disabled, Enabled When set to enabled BIOS uses PCI busmastering for reading/ writing to IDE drives. Some PCI IDE cards may require this to be set OffBoard PCI/ ISA IDE Auto, Card PCI Slot 1/ 2/ 3/ 4/ 5/ 6 to the PCI slot number that is holding the card. When set to auto will works for most PCI IDE cards. IRQ3/ 4/ 5/ 7/ 9/ 10/ 11 Available, Reserved Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral device. 3.5.
EBM-PNV 3.5.4.1 Boot Settings Configuration Item Quick Boot Quiet Boot AddOn ROM Display Mode Bootup Num-Lock Options Description Disabled, Use the quick boot BIOS option to make the Enabled computer speed up the boot process. Disabled, Use the quiet boot BIOS option to select the Enabled screen display when the system boots. Force BIOS, Keep Curren On, Off The AddOn ROM Display Mode option allows add-on ROM (read-only memory) messages to be displayed.
User’s Manual 3.5.4.2 Boot Device Priority Use the Boot Device Priority menu to specify the boot sequence from the available devices. 3.5.4.3 Hard Disk Devices Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. EBM-PNV User’s Manual 61 Data Modul AG - www.data-modul.
EBM-PNV 3.5.4.4 Removable Devices Use the Removable Drives menu to specify the boot sequence of the available FDDs. 3.5.5 Security Settings Use the Security menu to set system and user password. 62 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.5.5.1 Change Supervisor/ User Password Provides for either installing or changing the password. EBM-PNV User’s Manual 63 Data Modul AG - www.data-modul.
EBM-PNV 3.5.5.2 Clear User Password Use the Clear User Password to clean a user password. 3.5.5.3 Boot Sector Virus Protection The boot sector virus protection will warm if any program tries to write to the boot sector. 64 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.5.6 Advanced Chipset Settings Use the chipset menu to access the Northbridge and Southbridge configuration menus. EBM-PNV User’s Manual 65 Data Modul AG - www.data-modul.
EBM-PNV 3.5.6.1 North Bridge Configuration Item DRAM Frequency Option Auto, Description This item allows you to manually 667MHz change DRAM frequency. Configure DRAM Timing by Disabled, This item allows you to enable or SPD Enabled disable by DRAM SPD. Initate Graphic Adapter IGD, PEG/IGD Disabled, Internal Graphics Mode Select PEG Port Configuration This item allows you to select which graphics controller to use as the primary boot device.
User’s Manual 3.5.6.1.1 Video Function Configuration Item Option Fixed Mode, DVMT Mode Select DVMT Mode, Combo Mode DVMT/ FIXED Memory Description Displays the active system memory mode. 64MB, Specifies the amount of DVMT/ 128MB, FIXED system memory to allocate Maximum DVMT for video memory. VBIOS-Default, Boot Display Device CRT, Select boot display device at post LVDS, stage. CRT+LVDS EBM-PNV User’s Manual 67 Data Modul AG - www.data-modul.
EBM-PNV 640 x 480, This item allows you to select 800 x 600, which panel resolution you want. 1024 x 768, 1024 x 600, 1024 x 576, 800 x 480, 1280 x 720, Flat Panel Type 1280 x 768, 800 x 600, 1024 x 600, 1024 x 768, 1024 x 768, 1024 x 768, 1280 x 800, 1280 x 600, 1366 x 768 RTD-2553 Chip EDID support Disabled, This item allows you to enable or Enabled disable RTD-2553 Chip EDID support.
User’s Manual 3.5.6.2 South Bridge Configuration Item USB Functions USB 2.0 Controller HAD Controller SMBUS Controller PCIe Wake LAN Boot rom Option Disables, 2/ 4/ 6/ 8/ 10 USB Ports Disabled, Enabled Disabled, Enabled Disabled, Enabled This option enables the number of USB ports desired or disables the USB function. This option is disabled by default. This option is used to enable the southbridge high definition audio controller. This option is enabled by default.
EBM-PNV 3.5.7 Exit Options Use the Exit menu to load default BIOS values, optional failsafe values and to save configuration changes. 3.3.7.1 Save Changes and Exit Use the save changes and reset option to save the changes made to the BIOS options and to exit the BIOS configuration setup program. 70 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 3.3.7.2 Discard Changes and Exit Use the Discard changes and Exit option to exit the system without saving the changes made to the BIOS configuration setup program. 3.3.7.3 Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program. EBM-PNV User’s Manual 71 Data Modul AG - www.data-modul.
EBM-PNV 3.3.7.4 Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the setup menus. F9 key can be used for this operation. 3.3.7.5 Load Failsafe Defaults Use the Load Failsafe Defaults option to load failsafe default values for each of the parameters on the Setup menus. F8 key can be used for this operation. 72 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. EBM-PNV User’s Manual 73 Data Modul AG - www.data-modul.
EBM-PNV 4.1 Install Chipset Driver (For Intel ICH8-M) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Chipset\Intel\ICH8-M. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Yes. Step1.
User’s Manual 4.2 Install Display Driver (For Intel Pineview) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Video\Intel\Pineview. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Yes. Step 1. Locate「Driver_Video\Intel\ Pineview\Setup.exe」. Step 2. Click Next. Step 4.
EBM-PNV 4.3 Install Audio Driver (For Realtek ALC888) Insert the Supporting CD-ROM to CD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to \Driver_Audio\Realtek \ALC888. Note: The installation procedures and screen shots in this section are based on Windows 2000 operation system. Step 1. Locate 「\Driver_Audio\Intel\ 6300ESB ALC888\setup.exe」. Step 3. The program executes the Setup automatically.
User’s Manual 4.4 Install Ethernet Driver (For Intel 82574L) Insert the Supporting DVD-ROM to DVD-ROM drive, and it should show the index page of Avalue’s products automatically. If not, locate Index.htm and choose the product from the menu left, or link to D:\Driver_Gigabit\Intel\ 82574L. Note: The installation procedures and screen shots in this section are based on Windows XP operation system. Step 3. Click Next to run the installation. Step 1.
EBM-PNV Step 5. Click Install to next step. Step 6. Click Next to next step. Step 7. Click Finish to complete the setup. 78 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual 5. Mechanical Drawing EBM-PNV User’s Manual 79 Data Modul AG - www.data-modul.
EBM-PNV Unit: mm 80 EBM-PNV User’s Manual Data Modul AG - www.data-modul.
User’s Manual Unit: mm EBM-PNV User’s Manual 81 Data Modul AG - www.data-modul.
Data Modul Headquarters Munich Landsberger-Str. 322 D-80687 Munich - Germany Tel.: +49-89-56017-0 Sales Office Duesseldorf Fritz-Vomfelde-Str. 8 D-40547 Duesseldorf - Germany Tel.: +49-211-52709-0 Sales Office Hamburg Borsteler Chaussee 51 D-22453 Hamburg - Germany Tel.: +49-40-42947377 - 0 Data Modul France, S.A.R.L. Bat B - Hall 204 1-3 Rue des Campanules 77185 Lognes - France Tel.: +33-1-60378100 Data Modul Italia, S.r.l. Regus Center Senigallia Via Senigallia 18/2 20161 Milano - Italy Tel.
