User's Guide

10 | P a g e

Note, the dashboard will display both favorite and other implants within its 3-5-meter range. Other implants may

include implants associated with the same PhysioTel Digital system or neighboring systems. Favorites allow the

User to manually manage implants of interest. Also, the user-defined Implant Name which is designated in

Ponemah is saved when implants are added to Favorites in the Implant Detection page after the implants have

been added to an experiment.

For the implants that the device can detect, this page will display the following information organized into

columns:

Implant

The serial number for the implant.

Status

The status of the device.

• The status of the device refers to if the device whether the device is associated with a

Ponemah recording system. The different colors associated with each status are

included below:

• The green “Active” status indicates that the implant has been synced with a Ponemah

system and is actively sampling data.

• The orange “Standby status indicates that the implant has been synced with a Ponemah

system but is not currently sampling data.

• The grey Unknown status indicates that the implant is not currently synced with a

Ponemah system. Unknown may also display if PhysioDetect is out of range of the

implant for more than two scanning cycles. Scanning cycle is defined by when

PhysioDetect scans through all designated frequencies one time.

In order gain specific information about that implant, tap on the implant row to pull up the

implant menu. This will appear as shown: