User's Manual
14•SoftwarePhysioTelDigitalConfigurationManual
Guidelines for selecting frequencies
The frequency Group designation (above) is used to allocate certain frequencies as Primary or Secondary. Group 1
(A1, B1, C1, D1) is the Primary frequency and Group 2 (A2, B2, C2, D2) is the Secondary frequency. When setting up
a system all of the CLCs must be assigned to the same frequency Group. For instance, assign all of the Primary
frequencies first before using any of the frequencies from Secondary Group.
• Each CLC in the system must be assigned a unique communication frequency.
o CLC #1 – A1
o CLC #2 – B1
o CLC #3 – C1
o CLC #4 – D1
• CLC frequencies must be unique and should be from the same frequency Group.
o A1, B1, C1, D1
o A2, B2, C2, D2