User's Manual
PhysioTelDigitalConfigurationManual Software•15
• The frequency options that are available to assign to CLCs are listed in the right hand column labeled
Frequencies to Scan.
• The user must assign a unique frequency for each CLC before continuing to the next page.
• To assign a frequency, left-click the down arrow
of the drop-down menu associated with each CLC
listed.
Frequencies to Scan
The PhysioTel Digital system consists of CLCs, TRXs, and telemetry implants. The proprietary communication
protocols use several different radio frequencies to communicate with the implants. All individual implants are assigned
to a particular frequency. New implants that have not been previously configured will be detectable using the default
frequency (B1) assigned during manufacturing.
In the previous section, Assign Unique CLC Frequency
, the user assigns a separate frequency to each CLC. In this
section, the user selects which additional radio frequencies the system will scan in order to locate individual implants. If
all of the implants are previously un-configured, the user must only insure that the default shipping frequency is assigned
to a CLC in the left column – or is checked to be scanned in the right column.
• The frequencies are designated by four alpha-numeric characters XX – YZ (XX = region, Y = frequency,
Z = group)
Region Frequency Group
F1 = USA A 1
F2 = Europe B 2
C
D
• The frequencies that are assigned to CLCs in the left column, Assign Unique CLC Frequency, will
automatically be scanned for implants.
• Once a frequency is selected for a CLC, that frequency is no longer offered as an option in the Frequencies
to Scan column.