User's Manual
PhysioTelDigitalConfigurationManual Software•17
Page 3: Find All Implants Within Range
In this step of the configuration process the CLCs incrementally scan the frequencies selected in the previous screen.
The “operational” telemetry implants, detectable in the network environment, will be listed in the left dialog box labeled
Found Implants.
• The green progress bar tracks the status of the searching process and displays the frequencies currently
being scanned.
NOTE: It is normal for this process to take several minutes.
• Transmitters that are power ON, communicating, and within range will be listed in the Found Implants
column once they are identified.
• Transmitters that were previously configured in a study, but not yet detected by this iteration of the Wizard,
will be listed on the right in the Implants Not Found column.
• Implants will move from right to left as they are detected.
NOTE: Implants that are powered OFF will require a magnetic swipe in order to place them in a
communication mode.