User's Manual
38•SoftwarePhysioTelDigitalConfigurationManual
Network (Settings)
Obtain an IP address automatically
This is the normal operating mode for the CLC. With this option selected the CLC is queried and the values
that it reports back are displayed in the appropriate text boxes:
• IP v4 Address:
• Subnet Mask:
• Default Gateway:
NOTE: A new IP address can be generated by performing
an “extended” reset: push and hold the reset button on the
back of the CLC for 5-15 seconds.
Use the following IP address
If the user wishes to manually assign a specific IP address to the
CLC, click this radio button and type a new IP address in the text
box.
If you wish to perform this operation, follow this procedure:
1. Click the radio button for Use the following IP address
2. Enter the desired values in the text boxes labeled:
• IP v4 Address:
• Subnet Mask:
• Default Gateway:
3. Click Apply.
NOTE: A reboot of the system will have to be
performed in order for the new IP Address to
activate.
CAUTION: In the event that the user-assigned IP address is not accessible, this diagnostics
tool will lose contact with the CLC. To generate a new IP address, the user will have to
perform an “extended” reset: push and hold the reset button on the back of the CLC for 5-15
seconds.