User's Manual
PhysioTelDigitalConfigurationManual Software•41
Settings
The Settings page allows the user to monitor the RF Mode.
• Enabled – Normal operating mode
• Disabled – Halts communication between the TRXs and the implants
• Assessment – Allows the user to sample individual frequencies to assess the level of background RF
interference. The Assessment mode is used for the TRX RSSI History
function
Reboot
This function allows the user to perform a complete reboot of the CLC. A Reboot of the system is required to:
• Activate a firmware upgrade
• Change the IP settings
• To reboot the CLC left click the Reboot button
NOTE: the Reboot process may take several minutes to
complete. There are no progress indicators that appear on
this page, However there are indicator lights on the back
of the CLC box itself.
TRX Options
The TRX is the three letter designation for a Transceiver: the component in the system that receives Radio-
Frequency (RF) signals and converts it into digital form that is sent, via cable, to
the Communication Link
Controller; additionally, the component that transmits Radio-Frequency signals converted from digital form
sent via cable, from
the Communication Link Controller