User's Manual
42•SoftwarePhysioTelDigitalConfigurationManual
TRX Status
The TRX Status screen is a non-interactive snapshot of the current status of the TRXs that are connected to
the CLC. Each CLC is capable of interfacing with eight TRXs. This arrangement follows the layout on the
rear panel of the CLC unit.
TRX Status screen indicating that two TRX units are connected and enabled.
The line items are as follows:
TRX (#): Number 1-8
Enabled: A check mark in the box indicates that the TRX is connected and
available to communicate with the implants
Connected: Indicates whether the TRX is physically CONNECTED or NOT
CONNECTED to the CLC
Model Number:
Serial number:
Manufacture Date: YYYY-MM-DD
Assembly Revision:
Loader Revision:
Firmware Revision:
Error Status: Indicates that at least one error has occurred
Last error: The most recent error encountered
POST: Power On Self Test (0 =Passed, OK)
TRX Commands
This dialog screen allows the user to perform two functions that affect the performance of the TRX. The user
can upload a different version of the on-board read-only software (firmware). Additionally the user can adjust
the telemetry receiver thresholds to optimize RF communications.
There are four commands available in this window.