User's Manual
44•SoftwarePhysioTelDigitalConfigurationManual
Get RSSI Threshold
RSSI stands for Received Signal Strength Indicator. It is a quantitative measure of the strength of the RF
signal that the TRX is receiving from the implants. The Get RSSI Threshold command retrieves the current
threshold value from the TRX. The default value = 12
1. Select Get RSSI Threshold from the TRX Command: drop-down menu.
2. Click Send.
3. A successful operation is indicated by a blue colored Command Completed banner at the top of the
screen and a text string below the word Reply at the bottom of the screen.
4. The reported text value OK “xx” is the Hexadecimal value of the RSSI Threshold.
Set RSSI Threshold
RSSI stands for Received Signal Strength Indicator. It is a quantitative measure of the strength of the RF
signal that the TRX is receiving from the implants. The Set RSSI Threshold command allows the user to
adjust the lower limit of signal strength that the TRX will accept as viable information from the implants.
The default value = 12