User's Manual
PhysioTelDigitalConfigurationManual Software•45
NOTE: Anytime the TRX is unplugged, or the CLC is rebooted, the RSSI threshold value will revert
back to the hexadecimal default value of 0x12.
1. Select Set RSSI Threshold from the TRX Command: drop-down menu.
2. Select the TRX # from the TRX No: drop-down menu.
3. Enter a hexadecimal value in the small text box above the Send button.
4. Click the Send button.
5. A successful operation is indicated by a blue colored Command Completed banner at the top of the
screen and a text string “OK” below the word Reply at the bottom of the screen.