User's Manual
PhysioTelDigitalConfigurationManual Software•53
4. Left click the Set RSSI Threshold command.
5. A small text-entry box will appear below the Implant Command: line.
6. Allowable values for RSSI Threshold (values must be entered in Hexadecimal
format).
Decimal Hexadecimal
12 0C
28 1C
7. Adjusting the RSSI Threshold value will affect the implant performance in the following manner.
RSSI value Sensitivity Range RF performance
Increase
Decrease Decrease Increase
Decrease
Increase Increase Decrease
8. Enter a new value for the RSSI Threshold and click the Send button (values must be entered in
Hexadecimal
format).
9. A blue colored banner with the word OK! will appear at the top of the screen.
10. Repeat the Get RSSI Threshold procedure for verification.
11. If the command cannot be successfully completed an error code may be displayed. Refer to the
common error codes
below.