User's Manual

TruSense Configuration Manual TruSense Hardware Configuration 33
Network (Settings)
Obtain an IP address automatically
This is the normal operating mode for the CLC. With this option
selected the CLC is queried and the values that it reports back are
displayed in the appropriate text boxes:
IP v4 Address:
Subnet Mask:
Default Gateway:
NOTE: There is also a Reset button on the back of the
CLC which reboots the CLC. This action may generate a
new IP address.
Use the following IP address
If for some reason the user wishes to manually assign a specific IP address to the CLC, click this option
button and type a new IP address in the text box.
CAUTION: In the event that the user-assigned IP address
is not accessible, this diagnostics tool will lose contact
with the CLC. The CLC will have to be reset.
If you wish to perform this operation, follow this procedure:
1. Click the option button for Use the following IP address
2. Enter the desired values in the text boxes labeled:
IP v4 Address:
Subnet Mask:
Default Gateway:
3. Click Apply
NOTE: A reboot of the system will have to be performed in order for the new IP Address to
activate.