User's Manual

48 TruSense Hardware Configuration TruSense Configuration Manual
1. Click on the drop-down menu labeled Implant ID:
2. Select a device by left clicking on an implant serial number.
3. Click on the drop-down menu labeled Implant Command.
4. Left click the Ping command
5. Click the Send button
If the Ping dialog is successful:
A blue colored banner with the word OK! will appear at the top of the screen.
The implant will report back with a Hex value which is displayed in the Reply table at the bottom of
the screen.
If the Ping dialog is unsuccessful:
The Ping will be automatically repeated several times. If the implant fails to respond, a red colored banner
will appear at the top of the Screen.