User's Manual

TruSense Configuration Manual TruSense Hardware Configuration 49
A red colored banner with the word ERROR will appear at the top of the screen.
The implant will not report with a Hex value at the bottom of the screen.
NOTE: It may take several seconds for an unsuccessful Ping command to generate an error message
Get RSSI Threshold
The Get RSSI Threshold command retrieves the current threshold value from the TRX. Get RSSI
Threshold reads the signal strength value that allows the implant to hear commands from the CLC/TRX.
1. Click on the drop-down menu labeled Implant ID:
2. Select a device by left clicking on an implant serial number.
3. Click on the drop-down menu labeled Implant Command.
4. Left click the Get RSSI Threshold command.
5. Click the Send button