Instruction manual

19
CAMERA SETUP > FOCUS SETUP
Users can setup focus application. Factory settings as shown below:
 MODE:
This function is used for setting up focus mode, it can be set to Auto/ Manual/ Push Auto.
1.
Auto:
Select auto mode to enable automatic adjustment of the focus position.
2.
Manual
: Select manual mode to setup focus position manually.
3.
Push Auto:
Select push auto to adjust focus position TELE or WIDE, the preset value becomes AF
mode and returns to Manual Focus mode.
 DZOOM:
Digital zoom can be set to ON/ OFF.
 TRIGGER:
Select this function to enable PUSH AUTO setup, but setup option must first be set to option PUSH
AUTO.
 DEFAULT:
Return to default setup.
 RETURN:
Return to previous setup page.
CAMERA SETUP > EXPOSURE SETUP
Users can setup exposure application. Factory settings as shown below:
 MODE:
It consists of 3 types of mode: IRIS/ AUTO/ SHUTTER (Default Setup: AUTO).
1. IRIS: Select iris as priority adjustment mode.
2. AUTO: System will auto detect its brightness and the backlight compensation is auto defined by the system.
3. SHUTTER: Select shutter as priority adjustment mode.
 BRIGHTNESS:
Image brightness setup, setup range is 0~7. (Default Setup: 0).
<NOTE> This function will lock the settings on the BLC mode.
FOCUS
MODE Auto
DZOOM OFF
TRIGGER OFF
DEFAULT OFF
RETURN
EXPOSURE
MODE AUTO
BRIGHTNESS 0
GAIN LIMIT +6db
SHUTTER OFF
IRIS OFF
WDR F1.6
BLC OFF
DEFAULT OFF
RETURN