Instruction manual

22
CAMERA SETUP > EFFECT SETUP
User can setup some image application and effect. Factory settings are as shown below:
 NEGATIVE:
Negative effect can be set to ON/ OFF (Default Setup: OFF).
 MIRROR:
Three Types of MIRROR mode: OFF/ HORIZONTAL/ ROTATE (Default Setup: OFF).
 FREEZE:
Freeze function can be set to ON/ OFF (Default Setup: OFF).
 DEFAULT:
Return to default setup.
 RETURN:
Return to previous setup page.
GROUP SETUP
This function is designed to group the preset points in order. Each group is allowed to set up 32 preset points for
moving speed and retention time. The Auto Pan has a total of 8 setting groups.
 NUMBER:
Select and setup cruise function: 1~4 (Default Setup: 1).
 AUTOPAN INDEX:
Setup AUTOPAN preset value 1~34 into groups.
 PRESET NUMBER:
Setup desired preset points. If you do not wish to set all 32 preset points, set “0” as the last preset point.
<NOTE> “0” meaning to ignore the point after AUTOPAN points.
EFFECT SETUP
NEGATIVE OFF
MIRROR OFF
FREEZE OFF
DEFAULT OFF
RETURN
GROUP SETUP
NUMBER
AUTOPAN INDEX
PRESET NUMBER 0
SPEED (DPS) 60
DWELL TIME (SEC) 2
EXECUTE OFF
DEFAULT OFF
RETURN